Appliance Energy Use Calculator
Works out how many kilowatt-hours and how much money an appliance uses per day, month and year – with running hours, number of units and standby.
Input
Optional, every day by default.
Report a problem
How much an appliance uses
Where kilowatt-hours come from
A kilowatt-hour is power multiplied by time. A 2000 W appliance uses 2 kWh in an hour of running, and one in half an hour. All the arithmetic on this page is that multiplication, followed by the conversion to a month and a year.
The power is printed on the sticker at the back or bottom of the appliance, next to the voltage. If it says kilowatts, multiply by a thousand. If it says amps, multiply them by 230 (or by 120 in North America): that gives the power in watts, with a small error.
Hours plugged in are not hours running
This is the main mistake in such calculations. A fridge is plugged in around the clock, but the compressor runs roughly a quarter of the time; a water heater heats the water and switches off; an air conditioner reaches its set point and then just holds the temperature. Enter 24 hours for these, and the calculator returns a figure three to four times higher than the real one.
For a kettle, a bulb, an iron, a hair dryer, a computer or a TV it is simple: enter as many hours as it runs.
Standby
An appliance switched off with the button but left plugged in keeps drawing from half a watt to a few watts. Per hour that is nothing, per year it is a noticeable sum, because a year has 8760 hours. Enter this figure, and you will see on a separate row how much it costs just for the TV to be ready to turn on from the remote.
The biggest standby users are usually not the TV but the set-top box, the router, chargers with nothing attached and old appliances with a transformer power supply.
What is not here
Time-of-use rates, discounts and standing charges. The calculator multiplies kilowatt-hours by the one figure you entered. If you have a two-rate meter, work out the day hours and the night hours separately – that is two calculations, not one.
Common questions about appliance energy use
Where do I find the power if the sticker has worn off?
In the manual or on the maker's website by model. Most household appliances have typical values: a kettle 1800–2200 W, an iron 1500–2400, a microwave 700–1200 output and up to 1400 from the wall, a laptop 30–90, an LED bulb 5–15.
Why is a month a year divided by 12, not 30 days?
Because 30 days is not a month but a convention that loses five days a year and makes the monthly row disagree with the yearly one. An equal twelfth of a year matches the yearly figure, and the yearly figure is the main one here.
How much does a fridge really use?
A modern one uses about 200–400 kWh a year, which is roughly 0.6–1.1 kWh a day. To get that in the calculator, enter not 24 hours but 6–8: that is how long the compressor runs on average.
Can I work out a whole home?
Not with this calculator. It works out one appliance or several identical ones. For a home, work out each group separately and add them up – that way you see at once which three appliances make up most of the bill.
How accurate is the result?
As accurate as your hours. The error in the power itself is usually small, but "it seemed to run for an hour" against a real two is exactly double. Only a plug-in power meter between the appliance and the socket gives an exact figure: it costs about as much as a few lunches and settles the question for good.
What do I do with the figure next?
Compare appliances with each other. Swapping one bulb for an LED saves tens of kilowatt-hours a year, switching the router off at night saves a few. The biggest saving is almost always where high power meets many hours: heating, water heating, air conditioning.