Density converter
Converts density between kg/m³, g/cm³, g/L and pounds per cubic foot, cubic inch and gallon. Enter one number and see all eight units.
Input
Report a problem
What density is and what it is measured in
Density
How much mass fits into a unit of volume. A cubic metre of water weighs about a tonne, a cubic metre of steel almost eight tonnes, a cubic metre of air a little over a kilogram. So water's density is about 1000 kg/m³, steel's about 7850 kg/m³, air's about 1.2 kg/m³. The exact number depends on temperature and composition, so it is taken from a handbook or a material data sheet.
kg/m³ and g/cm³
Kilograms per cubic metre is the SI unit; the converter calculates everything else through it. Grams per cubic centimetre is exactly a thousand times larger: 1 g/cm³ = 1000 kg/m³. It is also grams per millilitre, kilograms per litre and tonnes per cubic metre. That is why water is about 1 g/cm³, and a density in g/cm³ is easy to compare with water.
g/L
Grams per litre is the same as kg/m³, just in other words. Solutions, water salinity and sugar content are written this way.
Pound, ounce, gallon
US and UK units. A pound is exactly 0.45359237 kg, an ounce 1/16 of a pound, an inch exactly 2.54 cm, a foot 12 inches. A US gallon is exactly 231 cubic inches (about 3.785 L), a UK gallon exactly 4.54609 L. The gallons differ, so pounds per US gallon and pounds per UK gallon are different numbers. The converter shows both.
Common questions about converting density
How do I convert kg/m³ to g/cm³?
Divide by 1000. Steel at 7850 kg/m³ is 7.85 g/cm³. For the reverse, multiply by 1000.
How many kg/m³ is one lb/ft³?
16.018463374 kg/m³. And 1 g/cm³ is 62.4279605761 lb/ft³, which is why water is about 62.4 lb/ft³ in American tables.
What is the difference between the US and the UK gallon?
The UK gallon is larger: 4.54609 L against about 3.785 L. The same liquid gives more pounds per UK gallon. If a source just says "lb/gal", it usually means the US gallon.
Why are there no g/mL, kg/L and t/m³?
Because they equal g/cm³ – the number in them is the same. mg/mL also equals g/L. This is written as a hint next to the matching rows.
Can I enter zero or a minus?
Zero – yes, that is a vacuum. A minus – no: density cannot be negative, and the converter says so. It also refuses a number with letters or spaces in it – the unit is picked from the list, not typed next to the number.
Online density converter – kg/m³, g/cm³, lb/ft³
Enter a density, choose a unit and see the same number in all eight units at once: kg/m³, g/cm³, g/L, pounds per cubic foot and cubic inch, ounces per cubic inch, pounds per US and UK gallon. Next to each row is the exact ratio it was calculated with.
How to use it
Type a number into the "Density" field – a comma and a point read the same. Pick the unit the number is written in from the list; if you leave the list alone, the converter reads it as kg/m³. The result updates by itself, with no button to press. The row for your unit shows your number unchanged. Small numbers, such as air in pounds per cubic inch, are shown in full, without an exponent.